| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Technical Support |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
APLUS vertical platform lifts are customized products for lifting cargo or wheelchair for disabled people.
APLUS vertical platform lifts have the features of smooth running speed, high safety , easy installation. small space required & no pits required.
APLUS vertical platform lifts are suitable for solving disabled passengers with large height differences between floors. Platform space can accommodate both wheelchairs and escorts.
Features of Aplus vertical wheelchair lift:
| Platform size | 1650mm(L)* 1100mm(W) | |
| Max Platform Height | 6m | |
| The minimum height of the lifting base plate |
60mm from the ground |
|
| Lifting Speed | 70mm/s-90mm/s | |
| Loading capacity | 250KG~350KG | |
| Control voltage | 24V/DC | |
| Power | 1.1KW,220V 50HZ | |
| Voltage |
220V/50HZ/25A (or customized for local power supply) |
|
| Drive System |
Hydraulic or screw |
|
| Control Mode | Inching Switch or Automatic | |
| Drive Control | Self-resetting system | |
| Overload | Protection Over current relay | |
| Material of Platform | Plastic electrostatic spraying | |
| Painting | Plastic electrostatic spraying | |
|
Guard panel & drive cabinet (framework) |
Aluminum Alloy / 304 stainless steel
|
|
| Operation Panel | Polished aluminum Alloy | |
| The way in and out | 90° / 180° | |
| Working Condition | Both indoors and outdoors | |
| Working temperature | From -10°~60°C | |
|
Installation
|
Non-pit installation, directly fixed to concrete floor (the concretefloor below the platform shall not be lower than the ground) |
|
|
Control Device
|
Calling box (installed on the wall nearby) and remote controller(Extra optional) |
|
|
Emergency Stop
|
The lifting and lowering process can be stopped immediately by pressing the emergency button. |
|
| Safety device |
Safety Interlock |
Lock the platform when it is out of control |
| Safety Sensor |
The operation must be stopped immediately the safety edge meets obstacles during operation. |
|
| Emergency lowering |
The platform can be lowered by opening hydraulic valve manually or rolling screw rod. |
|
| Auto-flap | Turn up after lifting | |
The operating procedures :
(1) The lifting platform has been strictly debugging, arbitrarily adjust the regulator valve.
(2) Carefully check the hydraulic, electrical system, no leakage or bare phenomenon before use, do not loose all the joints and fasteners before you can use.
(3) Power on, start the motor, empty lift, check the hydraulic system before use.
(4) The center of the load should be as close as possible to the center of the work surface. The moving doors at both ends of the guard railing should be locked before working.
(5) The lifting platform shall work strictly in accordance with its prescribed carrying capacity.
(6) The lifting platform is strictly prohibited from moving and shaking during the rise and fall.
(7) Any unusual noises during the work should be stopped immediately to avoid injury to personnel or damage to equipment
(8) After the work completed, you should lower the platform, cut off the power supply, and close the legs, pushing the platform into the specified position
){kind=link}